Subpanels and garage power · southeastern Wisconsin
Subpanel Installation and Detached Garage Power in Southeastern Wisconsin
A full main panel, a new garage, a workshop or an EV charger far from the house: a subpanel gives you the circuits you need without replacing your main service. Incan Electric installs subpanels, underground feeders and outbuilding wiring with permits and inspections across Milwaukee, Waukesha, Racine, Kenosha, Ozaukee and Washington counties.
- Licensed & Insured
- 5+ Years Experience
- Answered 24/7
- Permits & We Energies Coordination
WHEN YOU NEED ONE
Signs a Subpanel Is the Right Fix
Your main panel is full
No open spaces for a new circuit, or tandem breakers everywhere. A subpanel adds spaces without a full service upgrade, as long as your service has the capacity.
A detached garage or shop
Lights, outlets, a heater, a compressor or a welder need their own feeder and panel at the building, not an extension cord.
An EV charger far from the panel
A garage subpanel often makes an EV charger and future circuits cleaner and safer than one long run from the house.
A basement finish or addition
A subpanel near the new space keeps circuits short and leaves room for kitchens, bathrooms and HVAC.
HOW IT WORKS
Our Subpanel Installation Process
Load check
We confirm your main service can carry the new load. If it cannot, we tell you before anything else.
Feeder and trenching
Correctly sized feeder in conduit; for detached buildings, an underground run at code depth with a separate grounding electrode at the building.
Panel and circuits
Neutral and ground kept separate in the subpanel, breakers labeled, GFCI and AFCI where code requires.
Permit and inspection
We pull the permit and meet the inspector.
RECENT JOBS
Subpanel and Garage Jobs We Have Done
75th Street, Bristol
Detached garage feeder line and subpanel.
5th Avenue, Kenosha
Garage subpanel package with a Tesla Level 2 charger.
Elder Street, Waukesha
Subpanel and feeder line for a mobile home.
27th Avenue, Kenosha
Garage 20A and 50A 240V outlets.
COMMON QUESTIONS
Subpanel and Garage Power FAQ
Can you add a subpanel if the main panel is full?
Yes, as long as your service has enough capacity for the added load. We run a load calculation first; if the service is too small, a service upgrade comes first.
Does a detached garage subpanel need its own ground rod?
Yes. A subpanel in a separate building needs its own grounding electrode, and its neutral and ground stay separated.
How is power run to a detached garage?
Usually underground in conduit or direct-burial cable at the depth the code requires, with a disconnect at the garage. We handle the trench, the feeder and the permit.
Can I run a 100 amp subpanel off a 100 amp service?
Only if the actual load allows it. The subpanel breaker protects the feeder, but your total load still has to fit the main service. We check this before we install.
Do I need a permit for a subpanel?
Yes. A new subpanel or feeder needs an electrical permit and an inspection in every municipality we serve. We pull it for you.
GET STARTED
Schedule Your Subpanel or Garage Power Assessment
Tell us what you need and an electrician will call you back. Prefer to call? Reach us at (262) 235-5444, any time.
Call (262) 235-5444