Hot tub and spa wiring · southeastern Wisconsin
Hot Tub and Spa Electrical Installation in Southeastern Wisconsin
A hot tub needs a dedicated 240-volt circuit, a GFCI-protected disconnect within sight of the tub and proper bonding. Incan Electric wires hot tubs and spas to code, with the permit and inspection, across southeastern Wisconsin.
- Licensed & Insured
- 5+ Years Experience
- Answered 24/7
- Permits & We Energies Coordination
WHAT A HOT TUB NEEDS
A Safe Hot Tub Hookup, Done to Code
Dedicated 240V circuit
Most spas need a 40 or 50 amp 240-volt circuit sized to the manufacturer's nameplate.
GFCI disconnect
An outdoor-rated GFCI disconnect placed where the code requires, so the tub can be shut off safely for service.
Bonding
Metal parts of the tub and nearby equipment bonded together to prevent shock.
Panel capacity
We check that your panel has the space and capacity. If not, we plan a subpanel or upgrade.
RECENT JOBS
Spa, Pool and Outdoor Jobs We Have Done
101st Avenue, Kenosha
Swimming pool bonding, GFCI outlet refurbishing and pump commissioning.
75th Street, Bristol
Outbuilding feeder line and subpanel for outdoor equipment.
COMMON QUESTIONS
Hot Tub Electrical FAQ
Are hot tubs 30 amp or 50 amp?
Most 240-volt hot tubs need a 40 or 50 amp circuit; small plug-in spas can run on 120 volts. The tub's nameplate and manual set the size.
Do you really need a GFCI for a hot tub?
Yes. Code requires GFCI protection for hot tubs and spas, and it is the device that prevents a deadly shock if something fails.
How far from the hot tub does the disconnect go?
The disconnect has to be within sight of the tub and at the distance the code sets, so it is close enough to use but not reachable from the water. We place it to code.
Does hot tub wiring have to be in conduit?
Outdoor and underground runs go in conduit or listed wet-location cable. We choose the method that meets code for your yard.
Can I run a hot tub off a 100 amp panel?
Sometimes. We run a load calculation; if the panel is near its limit, we discuss a subpanel or a service upgrade.
Can I wire a hot tub myself?
It needs a permit and an inspection in our area, and mistakes around water can kill. Have a licensed electrician do it.
GET STARTED
Schedule Your Hot Tub Hookup
Tell us what you need and an electrician will call you back. Prefer to call? Reach us at (262) 235-5444, any time.
Call (262) 235-5444